Welcome to Law-Forums.org!   


Sponsor Links:

Discount Legal Forms
Discounted Legal Texts

Yale Safe

Discuss anything relating to Consumer Law

Yale Safe

Postby tate8 » Sun Nov 22, 2015 12:02 pm

I have an old safe with a Yale 100 place combination. It was in the house that I purchased and open. I had taken the back plate off of the interior with the hope of finding out the combination. In the meantime my 2 year closed and locked the safe. Stamped into the handle are some numbers 6 and underneath it are 58991. I am not sure if this is a combination or a serial number. Any help would be nice.

ANSWER: Aaron,

Come on now - you can't possibly, actually believe that a manufacturer of safes would stamp the combination, for the safe, where any one could see it?????   If they did safes wouldn't actually be very safe, and just think about the liability issues that would face the manufacture for EVERY safe that was burglarized because of the combination was stamped onto the handle!!!

This is simply the serial number of the safe - nothing more nothing less.   Manufacturers ALSO never published serial number listings for obvious security and liability reasons.   The serial number is tied into a list that indicates how THAT particular safe was built, and WHAT combination was set on the safe when it left the factory.   Part of the reason for this, is that if YOU the consumer, like the product and wanted another exactly like it, the manufacturer could simply look up how your safe was built in his file or database, and make another one for you, identical to the first.

When manufacturers go out of business, these records are generally lost for ever.  So there is no way of contacting them to find out what the original combination might have been.   This basically leaves you with two options.   You can try all of the possible combinations for your lock, or you can have a safe technician from a local safe company open the safe for you.   NOTE:  I never recommend using locksmiths for safe work as they generally don't have the training, knowledge or tools to work on safes without causing excessive damage.

You didn't indicate if you actually disassembled the lock or not - as this does make a difference.   Depending on how old your safe and/or lock is it may have a relocking device attached to the lock, or an internal relocking trigger.   Either one of these devices will securely lock your safe shut - even if you have the combination.   Similar to having a little man inside your safe welding it shut, these devices WILL require a safe tech's services to open the safe.

Sorry for the bad news, but I never recommend safe or lock disassebly as a DIY project for the same reason that I never recommend using locksmiths.

If you don't have a local safe company, let me know where you are located(zipcode) and I'll see who I might know in your area.

---------- FOLLOW-UP ----------

The thing that made me wonder is that I saw the disks in the lock mechanism and the 58 and the 99 fell into the cut outs. It was made by Syracuse safe Co. and is as far as I can tell identical to this safe down to the color and the outer artwork. http://images.cloud.worthpoint.com/wpimages/images/images1/1/0208/03/1_238fdc983 My zip code is 13367 and I would like to make the safe operational again if it is not overly expensive.

ANSWER: Aaron,

As far as comparing one safe to another - I don't do that or pay attention to safes which people think look like their safe, as usually they aren't the same.   If you would like me to verify what your safe actually is, AND verify the lock, I would be happy to, but I only deal with facts - in this case your safe, what it is, when it was made and the lock installed.

The Syracuse safes generally used a Yale OB style lock.   This was a fairly generic lock used by a lot of safe companies, so finding a replacement lock and/or wheel pack for your safe, should be relatively easy, though you will still have to contact a number of safe companies to see if anyone has one in their old parts drawers.

As far as the numbers on the handle matching any of the combination, this would NOT have come this way from the factory.   It may have been changed at some point by an owner or safe tech at some point to match the numbers on the handle.

In general, if you DO have a safe made by Syracuse Safe Company, then you won't have a relocking device or trigger to worry about,  all you will need to do is dial up the combination and the safe should open.

The dialing sequence for your safe should be:

4 times left to the first number,

3 times right to the second number,

2 times left to the third number,

1 time right - slowly - until the dial stops.   The gravity lever should have engaged the drive wheel and the bolt work can now be retracted.

NOTE:  if the handle has been turned towards the unlocked position, it may be exhibiting pressure on the gravity lever binding it, so that it will not release.   ENSURE that the handle is turned all the way to the locked(bolt work extended) position to ensure there is NO pressure on the lever.

NOTE:  Left is counter clockwise, Right is Clockwise.  Do not count the revolutions of the dial, count the INDIVIDUAL number as it arrives at the 12 o'clock index mark.   For instance if your first number is 50, you would turn the dial counter clockwise(left), stopping the fourth time the number 50 arrives at the 12 o'clock index mark.

Hope this helps, if not, I would recommend that you have a safe tech check it out.   While some will be closer than others, I'm putting them down in the order that I would recommend.   Obviously if you can take the safe to them, it will save you money.   While the last company is much closer to you, to my knowledge he only has basic safe skills, so you would need to discuss and services with him before having him do the work.   The first two are advanced safe techs and should be able to help open and repair your safe.   As far as cost it could easily be in the $350-$500 range plus parts.   Obviously if the safe is open, repairing or replacing parts will be easier and probably cheaper.

LaBarge Safe & Lock          about 115 miles away

518-271-0783     Dave LaBarge

801 24th St

Watervliet, NY   12189

Mark's Professional Safe Opening    about 235 miles away

716-553-6168     Mark Swetland

441 Cherokee Dr.

Buffalo, NY 14225 Advanced Safe & Lock          about 36 miles away.

315-658-2368     Ron Smith       

34646 Carter St Rd.

La Fargeville, NY  13656

Hope this helps,

---------- FOLLOW-UP ----------safe  

Here is a picture of the safe itself. Thanks for all your help
Posts: 57
Joined: Fri Apr 01, 2011 7:34 pm

Yale Safe

Postby Luken » Tue Nov 24, 2015 11:19 pm


Well you definitly have a Syracuse Safe, which confirms that the lock is probably the OB series Yale lock, using a gravity lever style blocking bar, and a three wheel lock.

All of the previous information should help you open the safe, if you have the combination, or give your safe technician the information he needs to get the safe opened and/or repaired.  
Posts: 35
Joined: Fri Mar 07, 2014 5:54 pm

Return to Consumer Law


  • Related topics
    Last post